DSP SDR Radio Receiver 4.3 Inch  100KHz To 149MHz FM MW SSB CW HAM Shortwave Radio Receiver DSP SDR Radio Receiver

DSP SDR Radio Receiver 4.3 Inch 100KHz To 149MHz FM MW SSB CW HAM Shortwave Radio Receiver DSP SDR Radio Receiver

1021230156711
$134.67
Skip to product information
DSP SDR Radio Receiver 4.3 Inch  100KHz To 149MHz FM MW SSB CW HAM Shortwave Radio Receiver DSP SDR Radio Receiver

DSP SDR Radio Receiver 4.3 Inch 100KHz To 149MHz FM MW SSB CW HAM Shortwave Radio Receiver DSP SDR Radio Receiver

$134.67
Color

SPECIFICATIONS

Battery Included: No

Brand Name: Qiilu

Certification: CE

Choice: yes

DIY Supplies: Electrical

High-concerned chemical: None

Material: Aluminum alloy

Model Number: DSP SDR Radio Receiver

Origin: Mainland China



DSP SDR Radio Receiver 4.3 Inch Touch Screen 100KHz To 149MHz FM MW SSB CW HAM Shortwave Radio Receiver



Feature:

1. PORTABLE RECEIVER: This DSP digital demodulation receiver, based on SDR software defined radio architecture, has 192kHz wide spectrum and waterfall display capabilities, combined with 16bit sampling could achieve CW, AM, SSB, FM, WFM demodulation functions.
2. EXCELLENT RECEPTION EFFECT: This full frequency band amateur radio receiver is equipped with powerful DSP chip and a long retractable antenna, with excellent signal quality, can receive various channels without any interference.
3. LCD DISPLAY: The SDR receiver adopts all aluminum alloy CNC shell, equipped with 4.3 inch 800x480 resolution high brightness IPS LCD display.
4. COMPATIBLE HEADPHONE: With a compact size of 14x7.4x2.2mm, you can take it anywhere. Supports regular 3.5mm headphones or CTIA interface headphones.
5. HIGH CAPACITY BATTERY: Built in 5000mAh 3.7V battery, can be used for about 10 to 12 hours (depending on the volume and brightness settings of the machine).


Specification:

Item Type: DSP SDR Radio Receiver
Material: Aluminum alloy
Display Technology: 4.3 inch IPS 800x480 resolution DC dimming high bright LCD screen
Control Method: Resistive touch screen, rotary encoder
Channel Selection: 1-99
Frequency: 100K to 149MHz, minimum step 1HZ
Speaker Volume (SPK): 0-35dB, 1dB step
Earphone Volume (EAR): 0-35dB, 1dB step
Modulation: CW, LSB, USB, AM, WFM, STE (FM stereo), I Q
AGC Settings: OFF, SLOW, MID, FAST
Reference Level (REF): -99 to 99dB, 1dB step
IF Gain: -12 to 67dB, 1dB step
Spectral Style Settings: Green supplement, green line, blue supplement, white line
Spectrum Bandwidth: RF spectrum (192kHz, 128kHz, 64kHz); Audio spectrum (64kHz)
Waterfall Area Setting: Waterfall or waveform (amplitude x1 x8 x64)
Five items that cannot be selected by the encoder:
A. Battery level display
B. Date and time settings
C. Station information display: preset station name capability
D. Display current spectral width
E. Input (POWER) antenna port POWER display
Working Mode: Single sideband CW, AM, SSB (LSB USB), WFM, stereo FM (requires headphones)
Step Frequency: 1Hz 10Hz 100Hz 1kHz 10kHz 100kHz 1MHz 10MHz
Spectrum Bandwidth: 192kHz, 128kHz, 64kHz, FFT real time spectrum display
Antenna Interface: BNC male, impedance 50Ω, maximum input power -20dBm
Reference Crystal Oscillator: TCXO 26MHz ±0.5ppm
Speaker Power: Maximum 3W, multimedia speaker 4Ω
Charging Port: USB Type C, 5.0V 2A
Current Consumption: About 250mA at 5V
Battery Capacity: 5000mAh 3.7V (built in)
Usage Time: About 10-12 hours, depending on machine volume and brightness settings
Channel Saving: 99 channels can be preset, and the station name, frequency, and alignment method can be preset
Description:
The product is based on for Tayloe Quadrature Product Detector method to achieve frequency mixing. The clock generator Si5351 generates two variable frequency orthogonal square wave signals as excitation, achieving an ultra low noise ZIF zero intermediate frequency receiver. The IQ signal obtained after mixing is output to the CODEC and collected by the MCU, where the DSP algorithm completes signal demodulation and display.


How to Use:

Use according to the instruction manual.


Package List:

1 x DSP SDR Radio Receiver

1 x Antenna

1 x Data Cable

1 x Instruction Manual


Note:

1. This machine adopts an SDR architecture. If there is a strong transmitting station near you, there may occur cross station or mirror station. Please be aware.
2. The input impedance of the antenna interface is 50Ω. For medium wave radio stations, it is recommended to connect a dedicated medium wave ring antenna externally to achieve better results.
3. Before listening with headphones, please pay attention to the earphone (EAR) volume setting to prevent discomfort caused by excessive volume.
















1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.

2) Payment must be made within 3 days of order.

3) If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.   


About shipping

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference .
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within the period,  please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

8. We seller are not in charge of import duty, buyer is responsible for that. Any dispute caused by this is unreasonable.

9. BR buyer please provide the cpf or cnpj, it will be better for you to get it more quickly. thanks


Return and Refund

1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS!And Pay attention please!The Shipping cost is bear by buyer themselves. 
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4.  We will bear all the shipping cost if the product(s) is (are) not as advertised.


About feedback

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them!




You may also like