DSP SDR Radio Receiver Shortwave Radio Receiver Rechargeable Shortwave AM FM DSP Radio with Headphone Antenna Jack for Hiking
SPECIFICATIONS
Battery Included: Yes
Brand Name: APWIKOGER
DIY Supplies: Electrical
High-concerned chemical: None
Origin: Mainland China
Shortwave AM FM DSP Radio: Stereo MP3 Player
Shortwave Radio Receiver: Portable Shortwave Radio
|
DSP SDR Radio Receiver Shortwave AM FM DSP Radio 4.3 Inch Touch Screen Stereo MP3 Player with Headphone Antenna Jack for Outdoor Features:
1. Advanced DSP Technology: This portable DSP SDR radio receiver uses a software-defined radio architecture with a 192kHz wide spectrum and waterfall display capabilities. With 16-bit sampling, it supports CW, AM, SSB, FM, and WFM demodulation, offering versatile listening options for radio enthusiasts. Specification: Origin: Mainland China Description: This product is based on the Tayloe orthogonal product detector method to achieve frequency mixing. The clock generator Si5351 generates two variable frequency orthogonal square wave signals as excitation, realizing an ultra-low noise ZIF zero intermediate frequency receiver. The IQ signal obtained after mixing is output to the CODEC, collected by the MCU, and the DSP algorithm completes the signal demodulation and display. Parameters: -Project Type: DSP SDR Radio Receiver -Material: Aluminum Alloy -Display Technology: 4.3-inch IPS 800x480 resolution DC dimming high brightness LCD screen -Control method: resistive touch screen, rotary encoder -Channel selection: 1-99 -Frequency: 100K to 149MHz, minimum step 1HZ -Speaker volume (SPK): 0-35dB, 1dB step -Headphone volume (EAR): 0-35dB, 1dB step -Modulation mode: CW, LSB, USB, AM, WFM, STE (FM stereo), I Q -AGC settings: Off, Slow, Medium, Fast -Reference level (REF): -99 to 99dB, 1dB step -IF gain: -12 to 67dB, 1dB step -Spectrum style settings: Green complementary, Green line, Blue complementary, White line -Spectrum bandwidth: RF spectrum (192kHz, 128kHz, 64kHz); Audio spectrum (64kHz) -Waterfall area settings: Waterfall or waveform (amplitude x1 x8 x64) -Five items that cannot be selected by the encoder: A. Battery level display B. Date and time settings C. Station information display: Preset station name function D. Display current spectrum width E. Input (POWER) antenna port POWER display -Working mode: Single sideband CW, AM, SSB (LSB USB), WFM, Stereo FM (headphones required) -Step frequency: 1Hz 10Hz 100Hz 1kHz 10kHz 100kHz 1MHz 10MHz -Spectrum bandwidth: 192kHz, 128kHz, 64kHz, FFT real-time spectrum display -Antenna interface: BNC male, impedance 50Ω, maximum input power -20dBm -Reference crystal oscillator: TCXO 26MHz±0.5ppm Audio interface: Supports regular 3.5mm headphone or CTIA (US standard) headphone interface -Speaker power: Maximum 3W, multimedia speaker 4Ω -Charging port: USB Type C, 5.0V 2A -Current consumption: About 250mA at 5V -Battery capacity: 5000mAh 3.7V (built-in) -Use time: About 10-12 hours, depending on the volume and brightness settings of the machine -Channel saving: 99 channels can be preset, and the station name, frequency and alignment method can be preset Product size: About 140.00x74.00x22.00mm/ 5.51x2.91x0.87inch
Note:
1x Radio Receiver
|