HAMGEEK R10C + H4 HackRF One R10C V2.0.x SDR Radio MAX2837 and H4 Portapack W/ 5 Antennas + LNA
R10C+H4
$277.38
Skip to product information
HAMGEEK R10C + H4 HackRF One R10C V2.0.x SDR Radio MAX2837 and H4 Portapack W/ 5 Antennas + LNA
$277.38
SPECIFICATIONS
Brand Name: shuolong
Feature1: It is a signature edition
Feature2: It uses the MAX2837 chip
Feature3: With a type-c port and a battery level display
Feature4: A 360-degree knob also functions as a button
Interface: Type-C
Model Number: HackRF One R10C+H4/H4M
Place of Origin: Guangdong, China
Type: H4/H4M
Version: V2.0.x
Warranty: 1 Year
Weight: 1KG
operating frequency: 1 MHz to 6 GHz
HAMGEEK R10C + H4 HackRF One R10C V2.0.x SDR Radio MAX2837 and H4 Portapack (w/ 5 Antennas + LNA)
Advantages:
* It is a signature edition
* It uses the MAX2837 chip
* With a type-c port and a battery level display
* A 360-degree knob also functions as a button
Attention:
1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.2 by default.
2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H4/H4M and a FAT32
formatted MicroSD card over 1G.
HackRF One R10C Description:
* HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.
* Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware
platform that can be used as a USB peripheral or programmed for stand-alone operation.
* It is designed with a type-c port.
Specifications of HackRF One:
* 1 MHz to 6 GHz operating frequency
* Half-duplex transceiver
* Up to 20 million samples per second
* 8-bit quadrature samples (8-bit I and 8-bit Q)
* For GNU Radio, SDR#, and the like
* Software-configurable RX and TX gain and baseband filter
* Software-controlled antenna port power (50 mA at 3.3 V)
* SMA female antenna connector
* SMA female clock input and output for synchronization
* Convenient buttons for programming
* Internal pin headers for expansion
* Hi-Speed USB 2.0
* USB-powered
* Open source hardware
* HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board
Improvements of H4/H4M:
* Single power on/off switch: When powered off, the battery will no longer phantom drain, meaning the device can be completely
powered off.
* Advanced battery management IC and battery display: The screen can display the battery level, including percentage, voltage, and
current/draw. It is easier to check the battery level.
* Matte screen: This matte screen helps you see the content of the screen more clearly in sunny outdoor environments.
* 360-degree knob and button: The knob button has been redesigned to a flat form, returning to the iPod-style click wheel. It is
more convenient to use the knob.
* GPIO port: The new generation H4/H4M adds a GPIO port, allowing users to create their own add-ons for the H4/H4M, similar to the
Flipper Zero. This is a major step forward and a feature not available in previous versions of Portapack.
* Improved charging speeds: The H4/H4M improves both the charging quality and speed.
* Microphone on/off switch: It allows you to turn the microphone on or off.
* Automatic sound switching between headphones and speakers: When you plug in the headphones, the H4/H4M will automatically switch
from speaker mode to headset mode. This is a feature not available in previous versions of Portapack.
Packing List:
* 1 x HAMGEEK R10C + H4/H4M (Assembled)
* 1 x Type-C Cable
* 1 x 40MHz-6GHz Telescopic Antenna
* 1 x 2.4/5/5.8GHz Antenna
* 1 x 35DBi GSM/3G/4G Antenna
* 1 x 40MHz-860GHz Antenna
* 1 x 700MHz-2700MHz Antenna
* 1 x 20DB 50MHz-6GHz LNA
* 1 x SMA Cable
Packaging Details:
* Weight: 1kg
Note:
* The product is assembled.
* Battery is included.
* The H4/H4M needs to be turned on in order to charge
* It is a signature edition
* It uses the MAX2837 chip
* With a type-c port and a battery level display
* A 360-degree knob also functions as a button
Attention:
1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.2 by default.
2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H4/H4M and a FAT32
formatted MicroSD card over 1G.
HackRF One R10C Description:
* HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.
* Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware
platform that can be used as a USB peripheral or programmed for stand-alone operation.
* It is designed with a type-c port.
Specifications of HackRF One:
* 1 MHz to 6 GHz operating frequency
* Half-duplex transceiver
* Up to 20 million samples per second
* 8-bit quadrature samples (8-bit I and 8-bit Q)
* For GNU Radio, SDR#, and the like
* Software-configurable RX and TX gain and baseband filter
* Software-controlled antenna port power (50 mA at 3.3 V)
* SMA female antenna connector
* SMA female clock input and output for synchronization
* Convenient buttons for programming
* Internal pin headers for expansion
* Hi-Speed USB 2.0
* USB-powered
* Open source hardware
* HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board
Improvements of H4/H4M:
* Single power on/off switch: When powered off, the battery will no longer phantom drain, meaning the device can be completely
powered off.
* Advanced battery management IC and battery display: The screen can display the battery level, including percentage, voltage, and
current/draw. It is easier to check the battery level.
* Matte screen: This matte screen helps you see the content of the screen more clearly in sunny outdoor environments.
* 360-degree knob and button: The knob button has been redesigned to a flat form, returning to the iPod-style click wheel. It is
more convenient to use the knob.
* GPIO port: The new generation H4/H4M adds a GPIO port, allowing users to create their own add-ons for the H4/H4M, similar to the
Flipper Zero. This is a major step forward and a feature not available in previous versions of Portapack.
* Improved charging speeds: The H4/H4M improves both the charging quality and speed.
* Microphone on/off switch: It allows you to turn the microphone on or off.
* Automatic sound switching between headphones and speakers: When you plug in the headphones, the H4/H4M will automatically switch
from speaker mode to headset mode. This is a feature not available in previous versions of Portapack.
Packing List:
* 1 x HAMGEEK R10C + H4/H4M (Assembled)
* 1 x Type-C Cable
* 1 x 40MHz-6GHz Telescopic Antenna
* 1 x 2.4/5/5.8GHz Antenna
* 1 x 35DBi GSM/3G/4G Antenna
* 1 x 40MHz-860GHz Antenna
* 1 x 700MHz-2700MHz Antenna
* 1 x 20DB 50MHz-6GHz LNA
* 1 x SMA Cable
Packaging Details:
* Weight: 1kg
Note:
* The product is assembled.
* Battery is included.
* The H4/H4M needs to be turned on in order to charge
