2. for Fiat Emergency Start New Update Version 1.1

Supported cars (Europe)

for Fiat 500 All 2007-2020
• for Fiat 500 Aba-rth All 2008-2020
• for Fiat 500L All 2007-2020
• for Fiat 500X 1.3 Mul-tiJet 2014-2019
• NEW for Fiat Do-blo All 2011-2020
• for Fiat Duc-ato All 2010-2020
• NEW for Fiat Fio-rino All 2011-2020
• for Fiat Gran-de Pu-nto All 2007-2020
• for Fiat Gra-nde P-unto Abarth All 2012-2020
• for Fiat Pa-nda All 2012-2020
• for Fiat Qu-bo All 2008-2020
• for Fiat Ti-po 1.3 Mul-tiJet 2014-2017
• for Alfa Ro-meo M-ito All 2008-2020
•for Alfa R-omeo Giulie-tta All 2012-2020
• for Citroen NEW for Citroen Jumper All 2012-2020
• for Ford Ka All 2008-2019
•for Iveco All models All 2010-2017 With Del-phi BCM
• for Jeep Renegade 1.3 for MultiJet 2017-2019
•for  Lancia for Ypsilon All 2012-2020
• for Peugeott for Boxer All 2010-2020

Supported cars (South America)

• for Fiat 500 All 2014-2020
• for Fiat Fior-ino All 2013-2021
• for Fiat Id-ea All 2010-2017
• for Fiat Lin-ea 1.4 T-Jet 2008-2018
• for Fiat P-alio All 2011-2017
• for Fiat P-unto All 2007-2011
• for Fiat Pun-to EVO All 2011-2017
• for Fiat T-oro Die-sel 2015
• for Fiat Q-ubo Dies-el 2008-2020
• for Ram ProM-aster Rapid Die-sel 2013-2018
• for Ram V700 Rapid Dies-el 2012-2016

Note : Device is sold only for official use. If you use it for any illeagal purposes, this is your own responsibility!

for FIAT Bypass

for FIAT Bypass - Emergency Starting Device Emulator will only work on vehicles equipped with a mechanical key.
It does not work with Smart Remote key. You need to plug the device directly into the OBD2 socket to use it.
Product Overview:
To use for FIAT Bypass - Emergency Start Tool you just need to connect it to the OBD2 socket in the car.
The tool bypasses the original immobiliser signal and allows you to start the car right after plugging it in.

Usage Requirements:
Car has to be equipped with mechanical key.
Car has to be equipped with original parts.
The device will work only in case of a lost key.
If the car is equipped with an SGW Module (some models starting from 2017 year),
you need to use 2018+ FCA Bypass Adapter in order to bypass Security Gateway Module

How to use:

Insert the device into OBD plug
(In some models produced from 2017 year, you have to use2018+FCA Security Gateway Module Bypass Adapter)
When you insert the product to the car the red led will stay on (power).
Green led (code) will start blinking fast.
Turn the ignition ON - the green LED(code) will keep still. (succesfully completed)
Start the car.
Note: If the green LED (code) keeps blinking fast after turning the ignition ON,
take the key out, wait 30 seconds and turn the ignition ON again.
Sometimes the procedure needs to be repeated again.

for PSA IMMO Reader Device has two modes

1. EMERGENCY Mode:
As soon as you plug the device into the car’s OBD socket, the device will boot into( EMERGENCY Mode) and you will see the red LED with a small one beep.
If there is a PIN CODE stored in the device from a previous read operation from your car or another car then the device will not be doing anything so you can turn the Ignition on and start the car.
But if there is no PIN CODE stored the device will start to read the PIN CODE.
If it finds the PIN CODE the buzzer will tell you with twice a small beep and a yellow LED.
Again you can turn the Ignition on and start the car so the LED will turn green, but if the device cannot find the PIN CODE it will tell you with a long beep, and the red LED will stay on.
Let’s say that you want to start a car other than your own, despite the presence of a PIN CODE stored in the device from your previous car.
When you put the device in the OBD socket of the new car, the device will start in EMERGENCY Mode, but with a wrong PIN CODE, so you can turn on the ignition then the device will know directly that its PIN CODE is wrong.
Then he will start rereading the PIN CODE for the new car automatically, and there is no need to delete the old PIN CODE from the device.

2. EXPERT MODE
You can enter this mode by pressing and holding the OK button and plugging the device into the car’s OBD socket.
Or if the device is already plugged you can press and hold the ok button and a quick press of the reset button at the back of the device.
The logo of our company will show and then the main menu.
There is nine menu item as you see
1. PINCODE READ: From this menu item, you can read the PIN CODE with all keys lost or key that exists.
By pressing an ok button the device will ask you if all keys are lost or not If the key exists you have to turn the ignition on to start the reading, if all keys are lost it is good to turn the ignition on for a stable PIN CODE reading.
If it finds the PIN CODE the buzzer will tell you with twice a small beep and a green LED, but if the device cannot find the PIN CODE it will tell you with a long beep and the red LED will stay on.
After successfully PIN CODE reading you can not start the car, you have to exit from this menu item by pressing the back button which is the left arrow.
Of course, the PIN CODE will stored in the device unless you delete it or read another car PIN CODE.
2. EMERGENCY: From this menu item you can start the car if you read PIN CODE previously, but if there is no PIN CODE saved the device will tell you that you must read PIN CODE first.
3. NEW KEY: From this menu item, you can add a new key for your car with a maximum of 5 keys, and the device will tell you step by step what to do.
4. CAN SPEED: From this menu item, you can set the CAN BUS speed because not all car has the same CAN SPEED.
5. SERIAL NUMBER: From this menu item, you can see the serial number of your device related to the customer.
6. Info: Here are our company website addresses.
7. PINCODE Show: From this menu item, you can see the stored PIN CODE if exists.
8. PINCODE Clear: From this menu item, you can cle-a-r the stored PIN CODE if you want.
9. PINCODE Write: From this menu item, you can write PIN CODE manually.

Note: Device is sold only for official use. If you use it for any illeagal purposes, this is your own responsibility!

3.for BMW Force Ignition Tool New Update Version 1.1

for BMW Force lgnition Tool Overview :
The for BMW Force lgnition ON Tool is an advanced tool made especially for for BMW vehicles. Its primary function is to
enable the ignition switch without needing a valid key. The BMWF - G Series Force ignition ON tool enables
you to disable the alarm, turn the ignition on and open the doors & trunks without a valid key, or unlock the t
runk if the smart key is in the trunk. Furthermore, it enables you to extract the for BMW ISN# code when you use it
with a specialized for BMW tool, to program for BMW all-keys-lost situations, as most key programming devices require
the lgnation to be ON to extract the ISN code. The for BMW F Series Force Ignition ON tool is designed to beuser-friendly, the tool is compatible with various for BMW-based systems, including M-ini Cooper & for Rolls Royce,
without requiring a computer connection, and it is suitable for CAS4 FEM BDC and NEW“G” systems.

Main Functions:

Turn ON lgnition: Activate the vehicle's ignition switch without a valid key.
For BMW Alarm Disablement: Effortlessly disable the car alarm, granting you ForBMW Trunk access without a valid key.
For BM-W ISN# Code Extraction Assist: it enables you to Easily extract the lSN# code, using a for BM-W key
programming device, essential for programming in the event of all keys being lost.
No Computer REQUIRED!: Standalone functionality, eliminating the need for a computer.
Compatibility: Works seamlessly with most BMW-based systems, including for BM-W, Mi-ni Coo-per, and for Rol-ls Royce with CAS4, S FEM-BDC systems.
It is able to turn on circuit 15 safely also works on for BM-W electric vehicles.